Solfisan 1 l

DESCRIPTION

Solfisan (Solfisan) - used for the treatment of premises and adjacent areas for the destruction of cockroaches, ants, bedbugs, fleas, flies, mosquitoes and rat mites on objects of various categories. Solfisan is a colorless to yellow oil-based emulsion. The product mixes evenly with water in any ratio.

ACTIVE SUBSTANCE

Cyfluthrin - 5%

PHARMACOLOGICAL PROPERTIES

The active ingredient of Solfisan is cyfluthrin, which belongs to the group of synthetic pyrethroids and has a wide spectrum of insectoacaricidal action against cockroaches, ants, bedbugs, fleas, flies, mosquitoes and rat mites.

The mechanism of action of cyfluthrin is to block the transmission of nerve impulses, which causes impaired coordination of movements, paralysis and death of insects and ticks. According to the degree of impact on the body of warm-blooded animals, the drug belongs to moderately hazardous substances (III hazard class according to GOST 12.1.007-76). When applied to intact skin - to the IV hazard class according to GOST 12.1.007-7.

DOSAGE AND APPLICATION

For the destruction of arthropods, freshly prepared emulsions are used at concentrations of 0.05%; 0.025%, 0.012%; for DV, which corresponds to a dilution of 1: 100; 1: 200 and 1: 400. Working emulsions are prepared by adding appropriate amounts of the agent to tap water at a temperature of 18 В° C to 25 В° C, constantly and evenly stirring for 5 minutes. The application rate of the product is 50 ml / m2 for smooth surfaces that do not absorb moisture and 100 ml / m2 for rough surfaces that absorb moisture. Remove the agent from the treated surfaces with a wet method 24 hours after application, but no later than 3 hours before the start of the working day; from other places - after 2.5-5 months - after the loss of its effectiveness. Repeated treatments are carried out according to entomological parameters.

When working with working emulsions, spray equipment of various brands is used.

To exterminate cockroaches , 0.05% water emulsions are used, selectively treating surfaces in places where localization is detected and on the paths of insect movement. Particular attention is paid to holes and crevices in walls, in door frames, thresholds, along skirting boards, in claddings, as well as ventilation vents, joints of pipes of water supply, heating and sewerage systems. Processing is carried out simultaneously in all rooms inhabited by cockroaches. With a high and very high number, adjacent premises are treated for prevention purposes: to prevent migration and subsequent colonization of cockroaches. Repeated treatments are carried out when insects appear.

To destroy gingerbread house and other species of ants, which often enter the premises, they process their paths (paths) or places of accumulation. A working emulsion of 0.025% concentration is used. The treatments are repeated when insects appear.

To destroy bedbugs , 0.012% aqueous emulsion of the drug is used. With an insignificant occupancy of the premises, bed bugs are treated only with their habitats; with a large population and in the case of wall cladding with dry plaster, the places of their possible resettlement are also subject to processing; cracks along skirting boards, curbs, wallpaper lagging spots, around door, window frames and ventilation grilles, cracks in walls, furniture, as well as carpets on the back. Repeated treatments are carried out when bugs are found.

For the destruction of fleas , a 0.012% water emulsion is used, treating walls (up to a height of 1 m), the floor surface in places where linoleum and baseboards are lagging, cracks behind the baseboards, carpets, paths on the back side. When processing cluttered basements, these rooms are preliminarily, if possible, cleaned of debris, and then thoroughly irrigated. Repeated treatments are carried out according to entomological indications.

For the destruction of adults of houseflies and other types of flies , a 0.025% water emulsion is used, which is used to irrigate the landing sites of flies in the premises, as well as the outer walls of buildings, garbage bins, and garbage chambers.

To destroy the larvae of flies, cesspools, waste and food waste are treated with 0.025% emulsion at intervals of 1 time in 20-30 days. Repeated treatments are carried out when winged flies appear in the room.

To destroy the imago of mosquitoes , a 0.012% emulsion is used, which is used to irrigate the mosquito landing sites in the room, as well as the outer walls of buildings or inside the fences for garbage containers, where mosquitoes hide in hot weather.

To destroy mosquito larvae, 0.012% water emulsion is used, which is evenly sprayed over the surface of open natural reservoirs of non-fishery value and urban water bodies: basements of residential buildings, wastewater, fire tanks where mosquito larvae breed. The consumption rate is 100 ml per 1 m2 of water surface.

Repeated treatments are carried out according to entomological indications - the appearance of live mosquito larvae. The treatments are repeated no more than 1 time per month.

To destroy the rat mite , 0.012% water emulsion is used, which is used to irrigate manholes, pipes of various communications, baseboards, walls and floors along them, as well as places of possible accumulation of mites - heated sections of walls and floors near heating devices and heating communications, the lower part of furniture, workers tables that handle the whole, including the boxes they contain. In the presence of false coverings, behind which rodents can move, ceilings and walls are also subject to processing. Re-processing is carried out according to indications, but not earlier than 10-15 days after the first.

SPECIAL INSTRUCTIONS

Pregnant and breastfeeding women, persons under 18 years of age and who have contraindications for working with disinfectants are not allowed to work with a disinfectant. All types of work are carried out using personal protective equipment (cotton suit or dressing gown, rubber gloves, mittens, headwear, goggles, as well as respirators РЁР‘-1, 'Lepestok'). Do not smoke, drink or eat while working. After finishing work, wash your hands and face with soap, rinse your mouth.

If Solfisan or its solution gets on the skin, the affected area should be washed immediately with soap and water, and if it gets on the mucous membranes, rinse with plenty of running water for 1-2 minutes. If swallowed, drink a few glasses of water with 10-15 tablets of activated carbon. Do not induce vomiting. If Solfisan gets into your eyes, rinse immediately with water and seek medical attention as soon as possible.

In case of signs of poisoning (dizziness, nausea, weakness), you should immediately consult a doctor and show the label of the product.

CONTRAINDICATIONS

Hypersensitivity to the components of the product.

SIDE EFFECTS

Subject to the recommendations for the use of Solfisan and its working solutions, side effects were not revealed.

SHELF LIFE AND STORAGE

Carefully. Store in a dry and well-ventilated room, protected from light and out of the reach of children and animals, separately from food and feed in the manufacturer's sealed packaging at temperatures from minus 4 to 45 В° C. The shelf life, subject to storage conditions, is 5 years from the date of manufacture. The shelf life of the product after opening the bottle is at least 28 days.

PACKAGING

Solfisan is produced in 1 liter polymer bottles.

Specifications

Product subcategory

Concentrates, emulsions (pyrethroids)

KolVUP

6

Manufacturer

APICENNA

Temperature regime

from -4 to +40

Teaser

for the destruction of insects and mites