Portable blood analyzer, MultiCare-in kit

MultiCare in is a portable express analyzer for determination of the following parameters in capillary whole blood: glucose, total cholesterol and triglycerides.

The MultiCare in express analyzer has been specially designed to measure multiple parameters using one drop of blood by replacing the test strip.

!!!

For the measurement of Total cholesterol" only, the device uses specially adjusted software based on the characteristics of the characteristics of male and female blood and taking into account the difference in blood composition before and after meals.

This adjustment will increase the accuracy of the results.

· 1) After installing the strip, the left of the display will show "F" (female), and on the right "M" (male).

Press the appropriate button ("-" for "F" or "+" for "M") to select the gender.

· 2) After two seconds, the display will show "A" (before meal) and "P" (after meal) Press the corresponding button ("-" for "A" or "+" for "P") to select the letter.

· 3) The selected letters will remain on the display for two seconds.

After that, a code and a blinking drop of blood will appear on the display, indicating that the device is ready to receive blood.

· 4) The result is saved in the device memory.

The MultiCare in express analyzer uses two different measurement techniques:

Amperometric - in test strips for determining glucose levels (glucometer function)

Reflectometric - in test strips to determine the levels of total cholesterol and triglycerides.

Technical

Specifications:

Convenient body, with external insert of a code-chip

Wide screen

Automatic switching on when inserting a test strip

Memory capacity: 500 measurement results with date and time

Determination of the average level of indicators for the last 7, 14, 21, 28 days

Analysis speed 5-30 seconds

Easy cleaning and disinfection of optical components (detachable part of the case)

Easy removal of the test strip using the "Reset" button on the back of the case

Data transfer to computer memory

Equipment:

Cholesterol test strips - 5 pcs.

Lancing device

Lancets - 10 pcs.

Chip code "Cholesterol"

Batteries (CR 2032) - 2 pcs.

User guide

Visual guide in pictures

Case.

Storage and handling:

The shelf life of the test strips is within 90 days after opening the tube or 18 months from the date of manufacture.

Expiration date is valid:

- When stored at 2 ° to 30 ° C (36-86 F) and RH < 80%

Application:

Remove the chip code from the test strip package.

Insert the code-chip into the corresponding slot located on the side of the express analyzer case.

Pressing gently, enter the chip code as far as it will go.

Open the vial, remove the test strip and close the vial immediately.

Insert the test strip into the test strip slot on the meter, with the arrows pointing towards the meter.

An acoustic signal ("beep") will be heard

When measuring glucose and triglycerides, the symbol and Code should appear on the display of the device.

Check that the Symbol and Code shown on the display match the Symbol and Code printed on the label of the test strip vial. The symbol and Code should appear on the meter display.

Check that the Symbol and Code shown on the display match the Symbol and Code printed on the label of the test strip vial.

Pierce your finger with a sterile lancet lancing device.

Squeeze the tip of your finger gently to receive a drop of blood (1 microliter).

Place your finger with a drop of blood near the bottom of the test strip (the part protruding from the meter).

The test strip will automatically draw the correct amount of blood and the meter will emit an acoustic signal ("beep").

The result will be shown in a few seconds.

To avoid contamination, use the reset button on the back of the meter to remove the used test strip.

Only one drop of blood is taken from each pierced finger for one measurement

There are contraindications.

it is necessary to consult a doctor and read the instructions.

Specifications

Manufacturer country

Italy

Item weight, g

200

Expiration date in days

710

Brand name

MultiCare in

A type

Blood glucose meter

Package weight, g

205

"