Plastisol syringe No. 3 type B (hard tip)

Designed for medical use in hospitals and for individual use. Disinfect the syringe by boiling in water for a leak. 30 min. Sterilize the tip by immersion in 6% hydrogen peroxide solution for 6 hours. Before using the syringe, grease the tip with neutral fat (petroleum jelly). After use, rinse with hot water to remove the medicinal solution and dry.

Features:

• Guaranteed free from burrs, roughness and unevenness.

• PH-neutral and does not cause allergic reactions.

• Individual cardboard packaging.

Mode of application:

• Before use, the syringe should be disinfected by boiling in distilled water for 10-5 minutes.

• For disinfection in hospitals, the method of immersion in a 3% hydrogen peroxide solution or in a 3% chloramine solution is used according to MU 287-113.

• At the end of the disinfection exposure, the syringe is rinsed with running drinking water.

• Before use, collect the syringe, for which the tip is inserted into the hole of the cylinder; grease the tip with petroleum jelly, lanolin or other neutral grease.

• The syringe should not come into contact with the medicinal solution for more than 30 minutes.

• After use, rinse the syringe with hot water and dry.

Composition:

Balloon - polyvinyl chloride, tip - polypropylene.