Petwant auto feeder 4-section, yellow 2l

DESCRIPTION

Petwant 4-Section Yellow Auto Feeder - The automatic programmable pet feeder with LCD display is suitable for any type of food, you can place dry and wet food in different sections at the same time.

MAIN FUNCTIONS

Display mode 12 or 24 hours;

The ability to record an audio message lasting 6 seconds;

A voice message is played before each feed;

The food bowl rotates according to the programmed time;

Possibility of setting 4 independent feedings at any time of the day or night;

The volume of each feed tray is 0.5 liters (total volume is 2 liters);

Powered by 4 size C batteries, which lasts for more than 1 year;

Additional compartment for ice or water on the feeder lid.

BEFORE USE

Carefully turn the feeder upside down, open both battery compartment covers by pressing the tabs.

Keep the ON switch in the off position.

Insert 4 C size alkaline batteries. Do not use old or cheap carbon batteries.

Close the battery compartment covers, turn the feeder over and turn on.

The feeder will make one revolution, the time on the display is 12.00.

The trough opens the feed containers in the following sequence:

Tray 1, Tray 2, Tray 3 then Tray 4. In case you only need one tray of food, fill only Tray 1, if two - Tray 1 and 2, and so on.

APPLICATION

Fill trays with food:

Refer to the Disassembly section to remove cover A and B.

Place food in the trough so that the level is not higher than the edge of the bowl. Otherwise, it can lead to malfunction of the feeder.

Refer to the Assembly section to replace the covers.

Make sure cover B is aligned with cover A.

Setting the current time:

In time setting mode. Press and hold the SET button for more than 2 seconds to enter the clock setting mode. The hours and minutes will flash.

Press the MODE button to change the hour value (the value will change upward). After setting the hours, press the SET button to confirm. The minute starts flashing.

To change the minutes, press the MODE button (the value will change upward). After setting the minutes, press the SET button to confirm. The hours and minutes will flash.

If necessary, press the MODE button to select 12 or 24 hour clock mode.

Press SET to confirm the current time and the numbers will stop flashing.

Setting the feeding time (To set the opening time of each feed tray):

Press MODE to switch from watch mode to feed time view (1: 1).

Press and hold the SET button for more than 2 seconds to enter the feeding time setting mode. The time setting will start from the 1st feed, the 1st digit shows the serial number of the feed and the number of the tray.

Now the hours (second and third digits) will flash, press the MODE button to set the feeding time (hour), the time changes upwards, then press SET to confirm.

After confirming the time of the first feeding, set the time of the next (2nd) feeding (the 1st digit will change to 2, then to 3, to 4 and first to 1), repeat step 3 to set it.

Repeat step 3 until all 4 feeds have been set, after setting the time of the last feed, the display will return to clock mode.

To view and start the feeding timer:

Press MODE to switch from watch mode to view feeding time, the sequence will repeat: clock> first feeding time> second feeding time> 3rd feeding time> 4th feeding time> hours.

Press START NOW button to start feeding timer now. The bowl will make a full turn and Latok 4 will open, a voice message will be played, the bell icon will light up.

Or press the START TOMORROW button to activate the feeding timer at 0.00 hours the next day. The bowl will also make a full turn, the message will play and the bell and Zz icons will light up.

Display mode:

- Use the MODE button to switch between clock and feeding time (the sequence will repeat: hours - first feeding time - second feeding time - 3rd feeding time - 4th feeding time - hours).

Sound signal recording (Record a personal voice message for playback during feedings):

Press and hold the REC button until the red indicator light comes on.

Say your message, you have 6 seconds to do this.

When finished, release the REC button.

Playing a voice message. (To listen to the voicemail you recorded):

Press the PLAY button.

Your message will be played.

Before each feeding, the voice message will be played 3 times.

Battery Replacement:

Replace the batteries when the red LED (Low Battery Indicator) blinks. Use only new alkaline batteries.

SPECIAL INSTRUCTIONS

Before using the automatic feeder, remove the packaging and protective materials from all surfaces. Some parts may be packed in plastic bags: Strangulation HAZARD - Move bags out of reach of children or your pets.

Read this manual carefully before using the feeder. Incorrect settings can lead to the fact that your pets receive insufficient food or even go hungry.

This automatic feeder is intended for indoor use ONLY. Place the feeder in a dry place on a flat surface. Do not install the feeder in a toilet, in a confined space, or close to a wall, as the top of the appliance rotates to access the trays. Plus, installing in a confined space will make it difficult for your pets to access food.

Do not let children play with the feeder. This can lead to malfunction of the feeder or its complete breakdown. The presence and supervision of adults is required if a child is in the immediate vicinity of the device. Do not try to disassemble the trough body yourself.

If the automatic feeder is not used for a long time, remove the batteries from it. Do not use batteries of unsuitable parameters and brands

SHELF LIFE AND STORAGE

Shelf-life Unlimited.

Specifications

KolVUP

1

Manufacturer

Petwant

Teaser

automatic programmable pet feeder