Glucometer iCheck 'iCheck' (test strips # 25, lancets # 25, pen)

Manufacturer: DIAMEDICAL LTD TAIWAN

The ICEK blood glucose monitoring system is intended for in vitro diagnostics (external use) both by professional doctors and directly by people who independently control blood glucose levels.

The iCheck meter is designed to provide a simple and accurate method for measuring capillary blood glucose.

The principle of the method is based on the use of biosensor technology.

The use of the enzyme glucose oxidase as a sensor allows for a specific analysis for the content of beta-D-glucose.

Glucose oxidase is a trigger mechanism for the oxidation of glucose in the blood.

The current generated by this is measured with a glucometer and corresponds to the glucose concentration in the blood sample.

Electrochemical (biosensors) - measure the current generated by the chemical reaction of glucose oxidation upon contact with the enzyme in the test strip sensor and convert the current value into a quantitative expression of the glucose concentration.

The iCheck glucometer has a number of advantages, such as:

The best price-quality ratio!

Precision comparable to reference methods!

Analysis speed and minimum sample quantity!

Analysis cost.

For the same amount, you can do three times more analyzes!

Special protective layer - allows you to touch any part of the test strip!

Test strips with a protective coating that protects against temperature extremes!

High-tech test strips that do not require additional use.

capillaries!

Capillary test strip - draws in the required drop volume for analysis in 1 second!

Double control - the two-electrode structure provides a comparison of the results of the two working electrodes!

ICheck test strips have a number of advantages, such as:

Capillary test strip - draws in the required volume of a drop of blood in 1 second.

Special protective layer - allows you to touch any part of the test strip.

Special contact strips - eliminate the possibility of error. (If the test strip is inserted incorrectly, the device will not turn on.)

Special control field - changes color and indicates if there is enough blood.

Double precision control - the two-electronic structure provides a comparison of the results of the two working electrodes.

ICheck test strips are designed to determine glucose levels.

For the analysis, a drop of blood with a volume of 0.9 μL is sufficient.

Testing time is 9 seconds.

The sip in function makes it easier to apply blood to the test strip.

When a drop of blood touches the edge of the reaction zone, blood is absorbed into the reaction zone by means of microcapillary diffusion.

They are intended for in vitro diagnostics both at home and in hospital.

The measuring range is 20-600 mg / dL (1.1-33.3 mmol / L).

TECHNICAL

Specifications:

Analysis speed 9 seconds

A drop of blood 0.9 μl

Measurement range from 1.7 to 41.7 mmol / l

Memory for 180 measurements with corresponding date and time

Average result over 7, 14, 21, 28 days

Automatic shutdown after 3 minutes of device inactivity

Device weight 50g (with battery)

Lifetime warranty

Test strips are packaged in packs of 25.

in a tube

Test strips for iChek glucometer are calibrated by plasma

EQUIPMENT:

Blood glucose meter iCheck

Soft carrying case

ICheck test strips - 25 pieces

Lancet device + 25 iCheck lancets

Coding strip

Battery CR 2032 - 3 Volts

Instructions in Russian

STORAGE and HANDLING:

The shelf life of iCheck test strips is within 90 days after opening the tube or 18 months from the date of manufacture.

Shelf life is valid when stored at 2 ° to 30 ° C (36-86 F) and RH < 80%

APPLICATION:

Take out one test strip and immediately close the vial lid tightly.

Insert the test strip into the meter (black stripes first).

When inserting a test strip, you can grab any part of it.

Place the lancet device against the side of the fingertip and press the lancet button.

Touch your fingertip to the blood application point on the test strip and hold until the reaction zone fills with blood.

Check the result in 9 seconds.

Remove the test strip from the meter.

Discard it and the lancet in a puncture-resistant container.

CARING FOR YOUR GLUCOMETER (iCheck)

When using the iCheck glucometer to examine blood samples from different people, for example, in a medical institution, to disinfect the device, it is recommended to wipe the outer surfaces with wipes soaked in 0.55% sodium hypochlorite solution, or 10% sodium hypochlorite solution after each use.

According to local regulations, equivalent disinfectants active against HIV, hepatitis B and other bloodborne pathogens may be used according to the guidelines for each product used.

ATTENTION:

Before using disinfectants other than those listed above, it is imperative to consult by calling the company's hotline at 8-800-555-49-00, as other disinfectants can damage the device.

Ensure that the instructions for use of the disinfectant are followed when using a chemical disinfectant.

Do not immerse the iCheck device in any liquids and do not hold it under running water.

Do not allow liquids, dirt, dust, blood, control solution, or liquid to get into the test strip slot and data port.

Do not insert a cleaning cloth into the test strip slot or data port.

Do not spray cleaning solution onto the instrument.

There are contraindications.

it is necessary to consult a doctor and read the instructions.

Equipment

EQUIPMENT:

Blood glucose meter iCheck

Soft carrying case

ICheck test strips - 25 pieces

Lancet device + 25 iCheck lancets

Coding strip

Battery CR 2032 - 3 Volts

Instructions in Russian

Specifications

Manufacturer country

Taiwan

Expiration date in days

360

Brand name

iCheck

A type

Blood glucose meter

Package weight, g

185

Information on technical characteristics, delivery set, country of manufacture