Automatic blood pressure monitor 'GemoDin-AKSMA', model 'HemoDin-Wi-Fi'

HemoDin-AKSMA is an automatic blood pressure monitor for measuring blood pressure with the ability to transfer results to a cloud server and advanced analytics.

HemoDin is intended for measuring blood pressure and analyzing blood circulation parameters using oscillometry.

The device transmits the measurement results to the telemedicine system via Wi-Fi.

Measurement HemoDin uses a compression volumetric oscillometry method.

It is based on the analysis of cuff pressure micro-pulsations.

The cuff is applied to the limb, air is injected.

As the pressure rises, the arteries of the limbs are compressed, and each pulse wave of pressure in the vessel leads to a slight increase in the pressure in the cuff - oscillations.

Unlike conventional meters, which determine only the maximum and minimum blood pressure and heart rate, GemoDin analyzes an expanded range of indicators.

This is possible thanks to highly sensitive sensors, high measurement frequency and special signal processing algorithms, which is transmitted to the server for analysis.

Therefore, the device determines the parameters of the state of blood vessels and heart.

In addition, due to the peculiarities of the measurement procedure, the device correctly measures blood pressure in most rhythm disturbances.

Analysis on the server:

The server receives the complete signal, which is analyzed in depth. With this analysis, it is possible to assess the parameters of the heart, in particular the stroke volume, and the vascular system, such as the total peripheral resistance and the speed of the pulse wave. An increase in the pulse wave velocity is an independent factor in the severity of the prognosis of arterial hyperthermia and damage to target organs. Therefore, the ability to control the calculated parameters of the server is essential from the point of view of optimizing therapy and refining the prognosis for a particular patient.

In the patient's personal account, you can evaluate the dynamics of pressure in a table or on a graph, determine the compliance of blood pressure with the target levels set for the patient.

The doctor can direct his conclusions and recommendations to the patient.

Efficiency is ensured by sending messages via electronic messengers directly to your mobile phone.

Spheres:

Medical institutions At home Can be used for two patients at the same time.

Benefits:

HemoDin uses a special measurement method to reduce the risk of erroneous blood pressure rise during measurement

In this case, the results of measuring blood pressure, even in the case of arrhythmia, will be as clear as possible.

Adjusting the rate of change of cuff pressure based on cuff size and patient characteristics also improves measurement accuracy.

The device implements the function of additional data processing to determine the type of hemodynamics, which also increases the measurement accuracy.

An oscillometric curve is stored in the memory of the GemoDin device.

This gives additional possibilities for data processing to determine the type of hemodynamics.

And thanks to the serial (cyclic) mode of measuring blood pressure, standardization of measurement conditions is provided.

GemoDin has both wired and wireless (using Wi-Fi) data transmission to the medical information system.

They can be viewed in the free user account on a special server.

HemoDin will be optimal for family use - the history of measurements of two patients is stored in the device.

For the convenience of users, the device has a built-in clock and calendar.

Specifications

Expiration date in days

1825

A type

Tonometer

Brand name

AKSMA

Package weight, g

500