Activator water AP-1 variant 2m

Water activator AP-1 version 02M is a device for making living and dead water at home.

Equipped with electrodes with extended service life.

The anodes are made of titanium and the cathodes are made of stainless steel.

The ceramic glass acts as a diaphragm between the cathode and anode.

Anolyte is formed in it - dead water.

The main condition during the use of activated water is the following - you cannot mix water.

Differences between water activators AP-1:

ALL activators ap-1 have titanium anodes

All ap-1, except for version 1, have a current indicator to monitor the activation process

In versions ap-1, option 1, as well as options 2, 2M, 3, the cathodes are made of stainless steel

In versions 2M and 3, the cathodes have an additional coating of the metal-platinum group, which increases their resource

In versions 2T and 3T, the cathodes, as well as the anodes, are made of titanium (titanium is very durable and does not give ionic impurities of metals during electrolysis)

Options 3 and 3T, in addition to the standard ceramic cup, are also equipped with a larger cup.

As a result, you can get two options for volume: anolyte - 0.3 l, catholyte 1.7 l, or anolyte - 0.7 l, catholyte - 1.5 l.

Water activator AP-1 produces living water (catholyte) with acidity pH 8-10.5 and dead water (anolyte) with acidity pH 2.5-5.5.

You can measure the acidity of water using test strips or a special device - a pH meter.

Although, with a little experience, activated water can be distinguished by taste and smell.

The most important parameter of activated water is the redox potential (ORP). In short, ORP characterizes the energy of redox reactions that take place in any living organism. The fluids in our body have a negative ORP value (about -200), and the water we drink is positive (about +250). Negative ORP accelerate" the processes in cells, and positive ones slow it down. After the activator, living water has an ORP from -200 to -350 and is much easier absorbed at the cellular level, and dead ORP from +500 to +800 and is an excellent "inhibitor" of processes in cells, that is, a biological antiseptic. The ORP of living and dead water, as well as its lifespan, can be monitored using the ORP meter.

Living water is a kind of accelerator of life processes. It tastes very soft, like rainwater, and is easily absorbed by the body. When living water is consumed inside, the healing and recovery processes are accelerated, immunity is increased, and vitality is restored. Also, catholyte is used to accelerate seed germination, increase the yield of grain and vegetable crops. The use of living water in horticulture gives an increase in yield up to 20-30% and acceleration of seed germination by 7-10 days.

Dead water slows down biological processes.

Therefore, it is used as an excellent disinfectant solution in the treatment of skin and ENT diseases (rinsing the mouth and throat, rinsing the nose, lotions, compresses, washing wounds, etc.).

Also, dead water is used internally in the treatment of a number of diseases of the gastrointestinal tract, allergies of various origins, inflammatory diseases, etc.

You can drink living water all your life all the time, but dead water is used internally only in courses (as a rule, alternately with live water).

Features of water activation:

In living water, after activation, you can see a "foam" of white or brownish tint.

This is normal and indicates that the activation process went well.

Stir the water and the foam will quickly precipitate - these are dissolved salts and metals that "bound" into an insoluble precipitate during the electrolysis process.

Filter living water, for example, through a white paper towel (2-3 layers).

In very soft water, the foam may be almost invisible.

During activation, the water heats up to 36-38 degrees - warm (body temperature) water says that the process was going well.

ATTENTION!

The lifespan of living water is 8 - 12 hours in a dark place in glassware (preferably in a refrigerator).

Dead water has a shelf life of 12-24 hours in the refrigerator.

It is possible to determine that the water has not lost its properties using the ORP meter (a device for measuring the redox potential).

ORP of living water -200 \ -350, dead +500 \ +800.

Technical

Characteristics of the AP-1 02M water activator:

Titanium anodes

Stainless steel cathodes with additional coating

Current indicator

Supply voltage: AC 220 Volt

Maximum power consumption, Watt: 110

Received volume of living water (catholyte), ml: up to 900

Received volume of dead water (anolyte), ml: up to 300

Water treatment time, min: 10-30

Weight, kg: no more than 2

Contents of delivery:

Water activator AP-1 var 0.2M

Manual

Packaging

Flush insert VP1-1A

Measure for 1 g.

table salt.

Country of origin: Belarus.

"Aquapribor" Warranty: 12 months.

Specifications

A type

Water activator

Guarantee period

1 year

Brand name

Aquapribor

Manufacturer country

Belarus

vendor code

1475

Colour

White

Package weight, g

1080

"